dotfiles/themes/brethil.zsh-theme

# vim:ft=zsh ts=2 sw=2 sts=2
# color chart available at https://www.calmar.ws/vim/256-xterm-24bit-rgb-color-chart.html
# %F{202}: orange
# %K{202}: background orange
# 255: white
# See the prompt expansion section in `info zsh` for more info

function user_prompt(){
	# prints info about username/hostname
	# for ssh connections
	local p
	local host
	if [[ $UID -eq 0 ]]; then
			# root
			echo -n "%F{255}[%f" # open square bracket
			echo -n "%K{160}%F{255}%Broot%b%k%f"
			if [[ $SSH_CONNECTION ]]; then
				# add the white @
				# echo -n '%F{255} at %f'
				echo -n "%F{255}@%f"
			fi
	fi
	if [[ $SSH_CONNECTION ]]; then
		if [[ $UID -ne 0 ]]; then
			echo -n "%F{255}[%f" # open square bracket
		fi
		# underlined orange hostname (%m)
		echo -n "%K{202}%B%F{255}%m%f%k%b"
		if [[ $UID -ne 0 ]]; then
			echo -n "%F{255}]%f" # close square bracket
		fi
	fi
	# close square bracket
	if [[ $UID -eq 0 ]]; then echo "%F{255}]%f"; fi
}

function job_prompt() {
  local JOB_PROMPT="%(1j.%B%K{202}%F{220} %j %k%b.)" # Shows jobs number on an orange background if there are background jobs
  echo "$JOB_PROMPT"
}

function shlvl_prompt() {
  local SHLVL_PROMPT
  if [[ -n "$BYOBU_PREFIX" ]]; then
    SHLVL_PROMPT="%(3L.%K{161}%F{255}%B $((SHLVL-1)) %f%b%k.)" # Shows SHLVL on a magenta background if SHLVL > 1
  else
    SHLVL_PROMPT="%(2L.%K{161}%F{255}%B %L %f%b%k.)" # Shows SHLVL on a magenta background if SHLVL > 1
  fi
  echo "$SHLVL_PROMPT"
}

function path_prompt(){
  # Shows last 3 items in path if there are more than 4
  local PATH_PROMPT="%F{white}[%F{green}%(4~:…/%3~:%~)%F{white}]%f"
  echo "$PATH_PROMPT"
}

# PREFIX/SUFFIX are added before/after `git_prompt_info`
ZSH_THEME_GIT_PROMPT_PREFIX="%f%{$fg[yellow]%} "
ZSH_THEME_GIT_PROMPT_SUFFIX="%{$reset_color%}"

ZSH_THEME_GIT_PROMPT_DIRTY=" %{$fg[white]%}%{$fg[red]%}x%{$reset_color%}"
ZSH_THEME_GIT_PROMPT_CLEAN=" %{$fg[white]%}%{$fg[green]%}√%{$reset_color%}"

# The following are part of `git_prompt_status`
# Rules:
#    ? : untracked
#    * : modified
#    + : added
#    $ : stashed
ZSH_THEME_GIT_PROMPT_STASHED="%B%F{32}$%b%f" # blue
# ZSH_THEME_GIT_PROMPT_MODIFIED="%{$fg[red]%}✗ " # this is equivalent to DIRTY, if DISABLE_UNTRACKED_FILES_DIRTY is set
ZSH_THEME_GIT_PROMPT_ADDED="%B%F{34}+%b%f" # green
ZSH_THEME_GIT_PROMPT_UNTRACKED="%B%F{red}?%b%f" # red

# The following are part of `git_remote_status`
# ZSH_THEME_GIT_PROMPT_EQUAL_REMOTE="%{$fg[green]%}="
ZSH_THEME_GIT_PROMPT_AHEAD_REMOTE="%F{255}>%f"
ZSH_THEME_GIT_PROMPT_BEHIND_REMOTE="%F{255}<%f"
ZSH_THEME_GIT_PROMPT_DIVERGED_REMOTE="%F{255}<>%f"

function virtualenv_info {
    [ -z "$VIRTUAL_ENV" ] && return

    local BOLD_PURPLE='%B%F{5}'
    local CLEAR='%f%b'
    local venv
    venv="$(basename "$VIRTUAL_ENV")"
    if [[ "$venv" == ".venv" ]]; then
      venv="$(basename $(dirname "$VIRTUAL_ENV") )"
    fi

    echo -n "$BOLD_PURPLE"
    echo -n " <$venv> "
    echo -n "$CLEAR"
}

function git_prompt() {
    if [[ -n "$(git status 2>/dev/null)" ]]; then
        local GIT_PROMPT=" %F{255}$(git_prompt_info)%B%F{255} |%f%b$(git_prompt_status)$(git_remote_status)"
        echo "$GIT_PROMPT"
    else
        echo ""
    fi
}

function check_last_exit_code() {
  local LAST_EXIT_CODE=$?
  if [[ $LAST_EXIT_CODE -ne 0 ]]; then
    local EXIT_CODE_PROMPT
    EXIT_CODE_PROMPT+="%B%F{88}-$LAST_EXIT_CODE-%f%b"
    echo "$EXIT_CODE_PROMPT"
  fi
}

function return_code_RPS1() {
  # For right-side prompt
  local return_code="%(?..$(check_last_exit_code))" # for RPS1
  echo "$return_code"
}

function ret_status() {
  local ret_status="%(?:%B%F{28} →%f%b:%{$fg[red]%} x%{$reset_color%})"
  echo "$ret_status"
}

_PROMPT_PROTO='$(virtualenv_info)$(user_prompt)$(path_prompt)$(git_prompt)$(job_prompt)$(shlvl_prompt)'

function prompt_too_long(){
  local zero='%([BSUbfksu]|([FK]|){*})'
  if [[ -x $commands[gsed] ]]; then # fuck darwin
    sed='gsed'
  elif [[ "$(uname)" == "Darwin" ]]; then
    local msg="error: multi-line prompt requires GNU sed"
    msg+="install with \"brew install gnu-sed\""
    echo "$msg"
    return
  else
    sed='sed'
  fi

  local stripped="$(echo ${(S%%)_PROMPT_PROTO//$~zero/} | $sed 's|\x1B\[[0-9;]*[a-zA-Z]||g')"
  local prompt_len=${#stripped}
  local max_len=$(($COLUMNS/2))
  if [[ $prompt_len -ge $max_len ]]; then
    echo true
  fi
}

PROMPT="$(echo "$_PROMPT_PROTO")"
NEWLINE=$'\n'
PROMPT+='${$(prompt_too_long)/true/${NEWLINE}}'
PROMPT+='$(ret_status) '

# Right prompt is just return code and time
RPS1='$(return_code_RPS1) %F{255}[%*]%f'